SPDContact us
KEC2-80 BOX Type
Enclosure type for the power inlet and main distribution boards, rated up to 80kA (8/20µs).
CategorySPD
ModelKEC2-80Y-B275 (구: KECKB-2Y80 BOX Type)
Technical dataClass II · In 40kA / Imax 80kA (8/20µs) · Uc 275V · Up 1.5kV
StandardIEC 61643-11 · CE
More from this category
KEC2-40 Direct Type
1P2W / 3P4W
Direct-mount instead of DIN rail — resistant to vibration and shock, and installable in tight spaces with fixed terminals.
KEC2-40 Din-rail Type
1P2W / 3P3W / 3P4W
Installed at distribution boards or load equipment to cut induced and switching surges. MOV and GDT in parallel give strong insulation recovery.
KEC20-T2 · KEC13-T1 External Disconnector
SPD전용 외부분리기
Installed between the SPD and the supply circuit to isolate on overcurrent or SPD failure, preventing fire and secondary faults.
KEC1-13 Din-rail Type
1P2W / 3P3W / 3P4W
Installed at the incoming panel or main distribution board to block high-energy direct-strike surges (10/350µs), using a high-performance metal oxide varistor.